Laview B10 Outdoor Camera Setup 

A dependable and easy-to-use security solution for keeping an eye on your house or place of business is the LaView B10 Outdoor Camera setup. It has two-way audio, motion detection, night vision, and 1080p HD video, and it is ideal for outdoor usage. It’s easy to set up—just plug the camera in, download the LaView app, and connect to Wi-Fi by following the in-app directions. The camera offers a variety of video saving choices by supporting microSD card recording and online storage. Its waterproof construction guarantees protection all year long, and intelligent warnings provide you with real-time information. The B10 promotes peace of mind and is perfect for both beginner and tech-savvy users.

Laview B10 Outdoor Camera Wireless Setup Features

Features of the LaView B10 Outdoor Camera Wireless Setup:

  • Wireless Connectivity: enables simple, cable-free installation by connecting to 2.4GHz Wi-Fi.
  • Quick LaView B10 Outdoor Camera Setup: Provides step-by-step, guided setting using the LaView app.
  • Remote Access: Use the LaView app to see live video and replay from any location.
  • Motion detection: When motion is detected, smart motion detection sends out real-time warnings.
  • Two-Way Audio: Use the integrated speaker and microphone to interact with guests.
  • HD Video Quality: 1080p Full HD resolution is used for recording and streaming.
  • Night Vision: Infrared night vision permits for clear footage even in total darkness.
  • Cloud & Local Storage: MicroSD cards up to 128GB and cloud storage are supported.
  • Weatherproof Design: dependable outside performance with an IP65 certification.
  • Support for Multiple Devices: Use a single app to control several cameras.

Laview B10 Camera WiFi Setup

  • Make sure the 2.4GHz Wi-Fi network is linked to your smartphone (5GHz is not supported).
  • Turn on the LaView B10 camera with the cord and adapter that come with it.
  • Hold off until the camera’s pairing mode (blinking light indicator) is activated.
  • Get the LaView app.
  • Launch the application and register or sign in to your LaView account.
  • To add new device, tap the “+” symbol.
  • From list of well-suited devices, pick the LaView B10 camera.
  • Now from the Laview security camera setup menu, select “Wi-Fi Configuration” or a comparable option.
  • When asked, provide your Wi-Fi network credentials.
  • Use your phone’s camera lens to scan the QR code that appears.
  • A status light or a voice prompt will indicate when the device has confirmed the connection.
  • After connecting, give your camera a name and make some basic adjustments.
  • Verify connection by testing live view.
  • If the app stimuluses you to elevate the firmware, make sure you do so.

Laview B10 Outdoor Camera Setup Manual 

  • Locate the camera, mounting kit, and power cable when you open the LaView B10.
  • To get a strong Wi-Fi signal, pick a sturdy installation location, such as a wall, ceiling, or pole.
  • To firmly install the camera, use the included template and screws.
  • Using the encompassed adapter, connect the camera to a power basis.
  • Await the blinking status LED, which signifies readiness.
  • To return to the factory settings, press and hold the reset button, which is often located next to the SD card slot, for around five seconds.
  • Connect the LAN wire if you’re using Ethernet.
  • Take note of the camera’s serial number or unique QR code on the label.
  • Enter the camera ID manually after logging in to a PC or the LaView web interface.
  • Set up the camera’s IP address and group it to a network.
  • Configure the motion zones, recording schedule, and notification settings.
  • If you want to record locally, use a microSD card (up to 128GB).
  • If necessary, manually upgrade the firmware via the interface.
  • Now that the camera is up and working, local monitoring is possible.

Laview B10 Outdoor Camera Setup With App

  • Install the LaView app after downloading it.
  • Register for a LaView account or sign in with a prevailing one.
  • Wait for the indication light to begin flashing after turning on the LaView B10 camera.
  • To add new device, launch app and press the “+” symbol.
  • You may either look for the B10 model or choose “Wi-Fi Camera.”
  • To start matching, adhere to the directions.
  • Verify that the Wi-Fi network your smartphone is linked to is 2.4GHz.
  • When asked, enter the name and password of your Wi-Fi network.
  • Hold your phone up to the camera until it scans the QR code that the software generates.
  • Await the camera to display a steady light or to notify a successful connection.
  • Choose a location label and give the gadget a name after pairing.
  • Turn on or alter two-way audio, motion detection, and notification settings.
  • Connect to cloud storage or put in a microSD card, if desired.
  • Verify the settings by testing live video.

Laview B10 Outdoor Camera Setup Issues And Solutions

Here are some issue and solution which one can face during LaView B10 Outdoor Camera Setup

Problem: The camera is unable to connect to WiFi or Laview camera offline.

Solution: Make sure the Wi-Fi network you’re using is 2.4GHz, not 5GHz. Make sure the signal is strong close to the camera and restart your network.

Problem: the QR code is not scanning

Solution: Hold the phone 6 to 8 inches away from the camera, clean the lens, and brighten the screen. In a well-lit place, try again.

Problem: The app cannot identify the camera

Solution: Verify that the camera is in pairing mode, which is indicated by a blinking light. Holding down the reset key will reset the camera.

Problem: Unable to utilize two-way communication or hear audio

Solution: Verify that the app and your phone have microphone and speaker permissions enabled.

Problem: Black screen or no video stream

Solution: Verify the power supply, restart the camera, then use the app to update the firmware.

Problem: Motion detection isn’t functioning

Solution: Modify the app’s sensitivity and detection zones and enable motion detection.

Problem: The app keeps stalling or crashing.

Solution: Reinstall the LaView app, update it, or clear the cache.

Problem: Unrecognized SD card

Solution: Make sure the microSD card is within the allowed size range of 128GB and format it to FAT32.

Laview B10 Outdoor Camera Firmware Update 

  • Launch the LaView app, then sign in with your credentials.
  • From the device list, pick the B10 camera that is attached.
  • On the live interpretation screen of the camera, tap the settings (gear symbol).
  • Locate the “Device Info” or “Firmware Version” option by scrolling.
  • If there is a firmware apprise accessible, you will be incited to “Update.”
  • Keep the camera switched on and linked to Wi-Fi while you tap “Update.”
  • It often takes a few minutes to update.
  • During the update, avoid unplugging or restarting the device.
  • The camera will automatically restart when it is finished.
  • Verify the firmware version once again to ensure the upgrade was successful.
  • Reset the camera and try again using the app if the apprise doesn’t work.

Laview B10 Outdoor Camera Reset

  • Find the reset button, which is usually located on the rear panel or next to the SD card slot.
  • Press and hold reset key with a paperclip or pin.
  • Hold it up until you hear a voice prompt or see the status light flicker quickly.
  • To begin the reset procedure, release the button.
  • The camera will immediately restart and go back to its original settings.
  • When the LED begins to gently blink, it is in pairing mode.
  • Re-add the camera as a new device in the LaView app.
  • When switching networks, resolving connection problems, or transferring ownership, a reset is helpful.
  • After the reset, adjust Wi-Fi and preferences.

FAQs

1. How can I fix my LaView B10 camera’s inability to connect to Wi-Fi during setup?

A poor signal, an invalid Wi-Fi password, or a 5GHz network might be the cause of your camera’s inability to connect. During LaView B10 Outdoor Camera Setup, make sure your phone and camera are on the 2.4GHz band, try relocating the router closer, and double-check your login information.

2. How can I determine whether the firmware on my LaView B10 is current, and what should I do if it isn’t?

In the device settings section of the LaView app, check the firmware state. If an apprise is obtainable, fix it by ensuing the commands. If it doesn’t work, make sure your Wi-Fi is steady, turn off your camera, or restart your device before attempting again. To avoid problems, don’t turn off the power when updating.

3. How can I correctly reset my LaView B10 camera, and when should I do it?

If you’re having trouble setting up the camera, switching Wi-Fi networks, or moving the device, try resetting it. Holding down the reset button will cause the LED to flicker for 5–10 seconds. It will go into pairing mode after rebooting, and you can use the LaView app to set it up as a new device.

Scroll to Top