Laview LV-N9808C8E Setup: Quick Guide

Are you seeking a comprehensive setup guide for your Laview LV-N9808C8E security system? You’re in the proper spot. Proper setup is essential for optimum performance, whether you’re a company owner keeping an eye on activities or a homeowner protecting your property.
From basic configuration to firmware upgrades, factory resets, WiFi camera setup, WPS pairing, and troubleshooting frequent difficulties, this thorough Laview LV-N9808C8E Setup guide will take you through every crucial step. We also go over how to manage your login, fix Laview camera issues, and make sure the most recent firmware update for the Laview LV N9808C8E is installed correctly.

The Laview LV-N9808C8E NVR System Overview

An 8-channel network video recorder (NVR) system called the Laview LV-N9808C8E is made to operate with Laview IP and WiFi cameras. This robust NVR, which supports up to 4K video quality, enables scheduled or motion-triggered recordings, live viewing, and remote access via the Laview app or web interface.

Important Features

  • 8 IP cameras are supported.
  • Video compression with H.265+
  • 4K output via HDMI
  • Remote access with the Laview app
  • Alerts and motion detection
  • recording continuously using a hard disk (up to 6TB)

Detailed Instructions For Setting Up The Laview LV-N9808C8E

1. Hardware Installation and Unpacking

Unpack the NVR and any associated accessories first:

  • The LV-N9808C8E NVR unit
  • An adapter for power
  • USB mouse
  • Ethernet cord
  • User guide
  • A standalone or pre-installed hard drive is optional.

Steps: 

  • Use HDMI or VGA to attach the NVR to a TV or monitor.
  • To navigate menus, connect a USB mouse.
  • Turn the gadget on after plugging in the power adapter.
  • To gain network access, use the Ethernet wire to link the NVR to your router.

Tip: To guarantee consistent connectivity, always use a high-quality Ethernet cable.

2. Initial Laview LV-N9808C8E Setup

After it is turned on:

  • A password creation screen for the admin account will appear.
  • Set the current date and time as well as the time zone.
  • Network configuration options include setting a static IP address if desired or choosing DHCP for automatic IP assignment.
  • Your login information (password and username) will protect the system after the process is finished.

3. Attaching Cameras

IP cameras that are wired

  • Use an Ethernet cable to link the camera to your router or a PoE switch.
  • Complementary Laview IP cameras on the same network will be instantly detected by the NVR.

Configuring a Laview WiFi Camera Setup

In order to install wireless cameras:

  • Make sure the camera is within WiFi range and switched on.
  • Go to the “Add Device” option on the NVR.
  • Either manually enter the camera’s IP address or look for devices.
  • During Laview LV-N9808C8E Setup, enter the right WiFi credentials.
  • Test the connection and save it.

Note: The WPS Setup technique is another option for simpler pairing:

  • Press your router’s WPS button.
  • Then press the camera’s WPS key.

An efficacious linking will be established when you wait for the LED indication to turn solid, which is often blue or green.

4. Using the Laview App for remote viewing

To gain remote access to your system:

  • Get the Laview app on Google Play or the App Store.
  • Open the app and complete the Laview login process.
  • Select “Add Device” and then scan the QR code found on your NVR or in the “Device Info” field.
  • After being added, you’ll have admittance to recordings, live feeds, and system settings.

Update The Firmware For Laview LV N9808C8E

Updating your NVR guarantees new features, performance enhancements, and problem fixes. To look for and Laview LV N9808C8E firmware update:

  • Go to the official Laview support website.
  • Find the most recent firmware for the model LV-N9808C8E.
  • Download the file in the FAT32 format to a USB disk.
  • Link the NVR to the USB.
  • Go to System > Upgrade under Menu.
  • After choosing the Laview LV N9808C8E firmware update file, begin the upgrade.
  • Throughout the upgrade, don’t turn off the NVR.
  • Restart the gadget when it’s finished. 

Although all settings will be preserved, it’s a good idea to make a backup of your Laview LV-N9808C8E Setup first.

How To Factory Reset Laview LV-N9808C8E

You can factory reset Laview LV-N9808C8E if your NVR stops working or you want a new start. Here’s how:

First Method: From the System Menu

  • Go to Menu > System > Default Settings.
  • Select whether to reset the network, display, and other parameters, or only some of them.
  • Verify the reset and restart the computer.

Method 2: Reset physically, if necessary

A pinhole reset button is present on some NVR models:

  • Switch the gadget off.
  • Turn it back on while holding the reset button with a pin.
  • Hold for ten to fifteen seconds, or until a reboot or beep is heard.
  • Your login credentials (by default, admin / no password) will be restored along with the factory defaults.

Typical Issues With Laview Cameras & Solutions

Do you have problems with your system? Here’s how to fix the most frequent issues with Laview cameras and connection snags.

1. The camera is not seen on the NVR

  • Make sure the NVR and camera are connected to the same network.
  • Verify the power supply for the camera.
  • Use the “Device Search” option on the NVR to rescan for devices.

2. The Laview App Doesn’t Connect

  • Verify that the NVR has an internet connection.
  • Look for updates for your mobile app.
  • Authenticate that the device is online and that the right QR code was scanned.

3. Low-quality video

  • Verify the camera’s resolution settings.
  • Authenticate that there is enough bandwidth available.
  • For increased dependability, use wired connections.

4. The Laview WiFi Camera Continues to Disconnect

  • Move the camera in closer proximity to the router.
  • Prevent other devices from interfering with your signal.
  • Think about utilizing mesh networks or WiFi extenders.

5. Rebooting the NVR At random

  • Verify ventilation to prevent overheating.
  • Update to the most recent firmware for the Laview LV N9808C8E.
  • Make sure the huge hard drive is compatible before utilizing it.

Advice for Maximum Efficiency

  • Set Motion Zones: To cut down on false alarms, customize detection zones.
  • Turn on Smart Alerts to get push alerts when there is motion or tampering.
  • Plan Backups: Save video to the cloud or other storage automatically.
  • Use Strong Passwords: To safeguard your system, change the default passwords.

Laview LV-N9808C8E Setup doesn’t have to be difficult. You should have no trouble configuring your system from start, connecting your cameras, updating the firmware, resetting the NVR, and fixing typical Laview camera problems with the help of this comprehensive, short tutorial.

FAQs

1. Can I use the LV-N9808C8E with other cameras?

Although the system does accept ONVIF-compliant cameras, only Laview cameras may be able to fully utilize its features, such as motion alerts.

2. What cameras are compatible with the Laview LV-N9808C8E?

The LV-N9808C8E works with IP cameras that are ONVIF compliant, particularly those made by LaView or Hikvision. Make that the camera is compatible with the same encoding format (e.g., H.264) and resolution.

3. How do I access the LaView LV-N9808C8E from my PC or phone?

Use the SADP/Client program on PCs or the LaView Net app on smartphones. For remote access and live viewing, enter the IP address or QR code of the NVR.

4. How do I configure motion detection on the Laview LV-N9808C8E?

Go to the camera settings, choose “Motion Detection,” choose detection regions, and change the sensitivity after logging into the NVR interface. To activate motion-triggered recording or alarms, save the settings.

5. What is the default IP address for Laview LV-N9808C8E?

192.168.1.64 is usually the IP address that is set by default. By attaching the NVR to a monitor and examining the network settings, or by using the SADP Tool, you may find it.

6. Can I add third-party IP cameras to the Laview LV-N9808C8E?

Yes, provided that the third-party cameras support ONVIF. Enter the IP address, protocol, and integration credentials using the NVR interface’s manual add option.

7. What cables are needed to connect cameras to the LV-N9808C8E?

For PoE (Power over Ethernet) connections, use Cat5e or Cat6 Ethernet cables. These use the PoE ports on the NVR to directly provide IP cameras with power as well as video and data.

8. What is the default username and password for LaView LV-N9808C8E?

Admin is the default login, while 12345 or blank is the most common password. You should reset the password if necessary or alter it at first setup for security reasons.

9. How do I connect the LV-N9808C8E to Wi-Fi or LAN?

For LAN connectivity, use an Ethernet cable to connect to a router. The NVR does not support Wi-Fi directly; if necessary, utilize a wireless bridge or access point.

10. Can I back up footage from my LaView LV-N9808C8E to a USB drive?

It is possible to connect a USB flash drive to the NVR. After choosing the camera and time range, export the video files to the USB device by going to Playback > Export.

error: Content is protected !!
Scroll to Top