Laview B5 Indoor & Outdoor Camera Setup

A flexible security option suitable for both indoor and outdoor settings is the LaView B5 Indoor & Outdoor Camera. It is suited for outdoor usage due to its waterproof design, which allows it to survive a variety of situations. Along with features like motion detection, two-way audio, high-definition video, and infrared night vision, the camera supports 2.4GHz Wi-Fi. The LaView app makes setup easy. Users can connect the camera to their Wi-Fi network, adjust settings, and remotely see the live stream. In order to improve home security and monitoring ease, the camera also offers local storage via microSD or cloud storage for recorded footage.

Methods to setup the Laview B5 Indoor & Outdoor Camera

Laview B5 Camera Setup Manual

The Laview B5 camera setup may be manually configured by doing the following steps:

Take out the mounting attachments, power adapter, and camera.
Get the LaView app from the App Store or Google Play.
Launch the app and enter your LaView Camera login information.
Plug the camera in after connecting it to the power adaptor.

To connect the camera to your Wi-Fi, choose “Add Device” in the app and adhere to the instructions (2.4GHz network required).
To finish pairing, line up the camera with the QR code that the software generates.
Check that the camera is working by watching the live stream.
To install the camera firmly, use the included screws.

Laview B5 Camera Setup Wps

The instructions below may be used to configure the Laview B5 camera setup utilizing WPS (Wi-Fi Protected Setup):

After plugging the camera in, watch for it to turn on.
Press your router’s WPS button. Usually, it remains active for two minutes.
For approximately five seconds, press and hold the LaView B5 camera’s WPS button.
Your Wi-Fi will be instantly connected to the camera. Successful pairing will be shown by an LED light.
Install the LaView app, then sign up or log in.
To add and control the camera, adhere to the in-app instructions.
For a steady connection, make sure your camera and router are within a fair range of one another.

Laview B5 Outdoor Camera Setup

Use these steps to configure the LaView B5 Outdoor Camera setup:

Get the app from Google Play or the App Store.
Using the included adapter, connect the camera to a power source.
Make sure the 2.4GHz Wi-Fi network is linked to your phone.
Only 2.4GHz is supported by the camera.
Launch the application, register, then choose “Add Device.”
Either manually enter the camera’s serial number or scan the QR code on the device.
To complete setup, adhere to the app’s instructions.
Secure the camera in the preferred outside place using the mounting kit that comes with it.
Make sure it’s close to the power supply.

Laview B5 Indoor Camera Setup

Use these procedures to configure the Laview B5 Indoor Camera setup:

Install the Laview app from Google Play Store (Android) or the App Store (iOS).
Create a Laview account or sign in with an existing one.
Using the included adapter, connect the camera to a power source.
Make sure the Wi-Fi network your phone is linked to is 2.4GHz, not 5GHz.
Choose “Add Device” in the app, then use the camera to scan the QR code.
Follow the instructions to finish the setup, which includes naming the camera.
Make sure there is a strong Wi-Fi signal before placing it where you want it.

Laview B5 Indoor & Outdoor Camera Setup With App

Follow these steps to configure the LaView B5 Indoor & Outdoor Camera with the app:

Install the camera where you want it—indoors or outdoors. Plugging it into a power source will confirm that it is powered.
Get the LaView app now.
Launch the app and sign in to your current LaView account or register for a new one.
Click “Add Device” in the app, then choose the B5 camera model.
The camera may be connected to your 2.4GHz Wi-Fi network by following the in-app instructions (it does not support 5GHz).
To finish pairing with QR scanning
After you’re connected, adjust the video quality, motion detection, and notifications.
Use the app to view the live camera feed.

Laview B5 Indoor & Outdoor Camera Firmware Upgrade

The LaView B5 Indoor & Outdoor Camera’s firmware may be updated by doing the following steps:

Validate that the camera is turned on and connected. Open the LaView mobile application.

If you haven’t already, sign into your LaView account.

Select LaView B5 camera from list.

Press the camera’s settings (gear icon).

Find the “Firmware Apprise” option in settings menu.

If there’s an update available, select “Update.” The updated firmware will install itself after downloading it.

Check settings to validate that elevation was effective by confirming the firmware version.

How To Reset Laview B5 Camera

The camera should be unplugged from the power source.
Locate the little reset button, which is often located on the camera’s bottom or back.

Using a paperclip or other such instrument, press and hold the reset button.
Re-plug the camera into the power supply while holding down the button.

Holding down the button for ten to fifteen seconds will cause the LED light to flicker or a reset chime to sound.
After rebooting, the camera will return to its original settings.

Laview B5 Indoor & Outdoor Camera Setup Issues And Troubleshooting

If the LaView B5 Indoor & Outdoor Camera isn’t occupied appropriately, try these troubleshooting steps:

Issues with Wi-Fi Connections:

Use 2.4GHz Wi-Fi: 5GHz is not supported by the camera. Be certain that network you’re linking to is the exact one.
Signal Power: To enhance the connection during setup, move the camera closer to the router.
Proper Password: Verify again that the LaView app has the right Wi-Fi password input.

Failures with App Connection:

App: Validate that you have recent version of the LaView app installed.
Camera Reset: Reset the camera by pressing and holding the reset knob for five to ten seconds, then try again if the connection doesn’t work.

QR Code Scanning Problems:

Lighting: When scanning the QR code, validate that there is enough light.
Distance: When scanning, hold the camera around 6 inches away from the phone’s screen.

Issues with Firmware:

Firmware Update: Use the LaView app to see if there are any reachable firmware elevations. Outdated firmware might lead to setup problems.

Problems with Power:

Power Supply: Check to see if the outlet or socket is providing enough power for the camera.

Reinstallation:

Remove and Reinstall: Take the device out of the application and begin the setup procedure over.

Laview Camera problems

To troubleshoot your LaView camera problems, follow these steps:

Validate that the camera is powered on correctly. Examine the cord and power outlet if the camera is wired. Verify that the light bulb camera socket is powered on.
To reset camera battery, switch it off and then back on.
To reset it to factory settings, hold down the knob.
Validate that network the camera is allied to uses 2.4GHz. Restart the router and reposition the camera if the connection drops.
Apprise the firmware on camera and the LaView app.

FAQs

Can I use the Laview B5 Camera outdoors?

Although the Laview B5 camera is usually intended for indoor usage, you may install it outside if it’s an outdoor or waterproof type. If using it outside, be sure it has an IP designation (such as IP65) for protection to dust and water. If not, weather exposure can harm it, necessitating protective enclosure for outside use.

Does the Laview B5 Camera support both 2.4GHz and 5GHz Wi-Fi?

No, only 2.4GHz Wi-Fi networks are typically supported with the Laview B5 Camera. 5GHz Wi-Fi is not compatible with it. For seamless functioning and communication, make sure both your phone and the camera are linked to a 2.4GHz network while configuring the camera.

Does the Laview B5 Camera have night vision?

Indeed, night vision is a standard feature of the Laview B5 camera. It provides good vision for nighttime surveillance by using infrared (IR) LEDs to record crisp video in dim or total darkness. Although the night vision’s range might vary, it typically covers normal interior settings well.

How do I view live footage from the Laview B5 Camera on my phone?

Download the Laview app (available on iOS and Android) to watch live video. To stream live video footage straight to your phone, connect the camera to your Wi-Fi network, log into the app, add the camera by scanning its QR code or entering its serial number, and then choose the camera.

What storage options are available for the Laview B5 Camera?

Often, the Laview B5 Camera has two storage options: cloud storage, which needs a subscription, and a microSD card slot for local storage (often supporting up to 128GB). While cloud storage provides remote access and off-site backup, local storage lets you record and watch video on the SD card.

How do I mount the Laview B5 Camera outdoors?

Select a safe spot with a clear view of the surroundings before mounting the Laview B5 Camera outside. Attach the camera to a wall or ceiling using the screws, anchors, and mounting bracket that come with it. For protection, place it close to a power source and, if necessary, shield it from severe weather.

What should I do if the Laview B5 Camera is not connecting to Wi-Fi?

Make sure the Laview B5 camera is on the 2.4GHz spectrum and close enough to the router if it isn’t connected to Wi-Fi. Make sure the app is up to current, restart your router and camera, and make sure your Wi-Fi password is accurate. If problems continue, reset the camera and begin the laview camera setup procedure again.